Mazda 323 1988 Workshop Manual page 735

STEERING GEAR AND LINKAGE 10
Inner guide
\
11. Check the lever for wear or damage.
12. Check the spherical face of the lever and the col-
lar for wear and damage.
13. Check the control valve for oil leakage.
ASSEMBLY
Assemble in the following order.
1. Install the inner guide in the following order.
2WD:
(1) Apply A.T.F. to the inner guide.
(2) Push the oil seal and the inner guide in to the
rack housing with the SST as far as they will go.
Caution
Do not damage the inner surface of the rack
housing.
4WD:
(1) Install the oil seal, "0" ring, snap ring to the
inner guide.
(2) Coat the oil seal and the "0" ring with A.T.F..
(3) Push the inner guide assembly into the thread-
ed end of the rack housing by hand.
10-53