Mazda 323 1988 Workshop Manual page 534

DISASSEMBLY
7c
Bearing Inner Race (1 st gear end of primary shaft
gear)
Press the bearina inner race from the shaft with the
SST
and a press.
Caution
Hold the shaft with one hand so that it does
not fall.
(SECONDARY SHAFT GEAR)
Bearing Inner Race and Secondary 4th Gear
1. Set the
SST
onto the secondary 4th gear.
2. Remove the bearing inner race and the secondary
4th
gear.
Caution
Hold the shaft with one hand's0 that it does
not fall.
2nd Gear and Secondary 3rd Gear
1. Remove the retaining ring.
7C-27