Mazda 323 1988 Workshop Manual page 639

REAR AXLE 9
Disc Plate or Brake Drum
Wear or damage to brake drum or disc plate.
Brake drum
Disc plate
Drum
Disc
63u09x.10
7
Note
Remove minor rust with sandpaper.
INSTALLATION
Install in the reverse order or removal and note the
following:
1, To install bearing outer race, use a hammer and
a brass rod.
Note
Tap in until the outer race is fully seated in
the hub.
2. Completely fill the area shaded in the figure with
lithium grease
(NLGI No. 2
or equivalent).
3. Install the bearing inner race and oil seal.
Note
a)Use a new oil seal, and coat the lip with
grease after installation.
b)Do not hit the oil seal directly with a ham-
mer; be sure to use a flat plate to press it in.
9-33