DISASSEMBLY
7A
Shift Fork and Shift Rod Assembly
The shift fork and shift rod assembly
can be removed
as follows:
1. Align the ends of the interlock
sleeve
and of the
control
lever,
then
turn
the shift
rod counter-
clockwise
2. While holding
the 1 st - 2nd shift fork with one hand
and the 3rd - 4th shift fork with the other, raise them
both at the same time and shift each of the clutch
hub sleeves.
3. Lift the control
end and remove
the steel ball, and,
at the same time,
remove
the shift rod from the
clutch
housing.
4. Separate
the shift rod and shift fork assembly
from
each of the clutch
hub sleeves.
7A-51