Mazda 323 1988 Workshop Manual page 47

IA
DISASSEMBLY
DISASSEMBLY
Disassembly Note
1. Care should be taken during the disassembly of any part or system to study its order of assembly.
Any deformation, wear, or damage also should be noted.
2. Code all identical parts (such as pistons, piston rings, connecting rods, and valve springs) so that
they can be reinstalled in the position from which they were removed.
3. After steam cleaning the parts, use compressed air to blow off any remaining water.
4. Remove the parts in the order shown in the figure.
Disassemblv of Ermine Auxiliarv Parts
IA-28