Mazda 323 1988 Workshop Manual page 637

REAR AXLE 9
3. Remove the lateral link through bolt.
Note
This bolt should be removed after loosening
the hub spindle to shock absorber through
bolts and it can be easily removed by lifting
up on the hub spindle.
4. Remove the hub spindle to shock absorber
through bolts.
5. Remove the hub spindle.
Disc Brake
1, Jack up the rear of the vehicle and support it with
safety stands.
2. Remove the following parts:
(1) Wheel and tire
(2) Hub cap
(3) Brake line from the shock absorber
(4) Remove the caliper assembly from the knuck-
le, and hang it from the shock absorber.
9-31