Mazda 323 1988 Workshop Manual page 42

ON-VEHICLE MAINTENANCE (VALVE SEAL) 1
A
Front
Rear
4. Install the spring retainer with the
SST (49
8012
OAO), and lightly tap the end to confirm correct as-
sem bly.
5. Install the thrust plate.
Tightening torque:
8-11 N.m (0.8-1.1 m-kg, 69-96 in-lb)
6. Install the rocker arm and rocker shaft assembly
on the cylinder head and tighten it gradually in the
order shown in the figure.
Note
Use the installation bolts for alignment when
installing.
Tightening torque:
22-28 N.m (2.2-2.9 m-kg, 16-21 ft-lb)
7. Apply a coat of sealant to the cylinder head cover
as shown in the figure.
8. Install the cylinder head cover.
Tightening torque:
5-9 N.m (OS-O.9 m-kg, 43-78 in-lb)
l A-23