Mazda 323 1988 Workshop Manual page 153

IB
ASSEMBLY
8. Measure the tension between the intake side cam-
shaft pulley and the exhaust side camshaft pulley.
If the timing belt tension is not correct, temporarily
secure the tensioner lock bolt so the spring is fully
extended and repeat steps 1-7 above or replace
the tensioner spring.
---
Deflection:
8.5-l 1.5 mm (0.33-0.45 in)
IS5 N (10 kg, 22 lb)
Timing Belt Cover
Install the lower, middle and upper timing belt cover
and a new gasket.
Tightening torque:
8-11 N*m (0.8-1.1 m-kg, 69-95 in-lb)
Crankshaft Pulley
Install the crankshaft pulley and baffle plate.
Tightening torque: 12-17 N.m
(1.25-l .75 m-kg, 109-152 in-lb)
Water Pump Pulley
Install the Water pump pulley.
Tightening torque:
8-111 N.m (0.8-1.1 m-kg, 69-95 in-lb)