Disassembly (Manual Steering, Variable Gear Ratio Type) - Mazda 323 1988 Workshop Manual

STEERING GEAR AND LINKAGE t 0
-..
DISASSEMBLY (POWER STEERING)
Disassemble in the sequence shown in the figure.
Caution
a) In order to prevent the entrance of dirt, all disassembly and assembly should be done
in a clean area.
b) Before disassembly, plug the openings of all pipe installation fittings, and then remove
all external grease and dirt from the gear and linkage.
I. Tie-rod end
2. Tie-rod end locknut
3. Boot band
4. Boot
5. Boot wires
;: tiayipes
8. Tie-rod
9. Washer
10. Damper ring
Il. Adjust cover locknut
12. Adjust cover
13. Spring
14. Rack support
15. Outer box
16. Oil seal
17. "0" ring
18. "0" ring
19. Seal ring
20. Rack
21. Oil seal
22, Inner guide
23. Dust cover
24. Oil seal
25. Lever
26. Valve case
27. Control valve bolt
28. Control valve
29. "0" ring
30. Gasket
31. Spacer
32. Bearing
33. Housing cover locknut
34. Housing cover
35. Lower bearing locknut
36. Thrust washer
37. Lower bearing
38. Pinion shaft
39. Mounting bracket
40. Mounting rubber
41. Gear housing
IO-47