Inspection - Mazda 323 1988 Workshop Manual

FRONT AXLE 9
/ Bea; ng rter race/
- I
-O/uter race
Disc Plate
After making matching marks on the disc plate and
the wheel hub, disassemble the plate and the hub.
Note
Use copper plates when clamping the disc
plate in the vise.
Wheel Bearing
1, Remove the outer bearing inner race with
SST.
Note
Hold the hub to prevent it from falling.
2. Remove the outer oil seal from the front hub.
3. Remove the bearing outer race with
SST
and a
press.
Note
a)Do not remove the bearing unless it is
b)%%%e race gradually and carefully.
INSPECTION
Wash the disassembled parts before inspecting. Re-
place any damaged parts. Minor rust should be re-
moved with fine sandpaper.
Inspect for:
1. Abnormal wear damage or seizure of bearing.
Note
Replace the bearing as a set (inner and outer
rades).
-
I
9-25