Mazda 323 1988 Workshop Manual page 839

FRONTDOORGLASSAND REGULATOR
14
3. Position the door glass so that the installation
can be removed from the service hole.
4. Remove the door glass installation bolts.
bolts
5. Remove the door glass upward
6. Remove the regulator installation bolts and then
remove the regulator through the service hole.
7. Remove the window motor mounting bolts, then
remove the motor from the regulator (power
window).
INSTALLATION
Install in the reverse order of removal, noting the fol-
lowing:
Power Window
Before installing the motor,, connect the leads to a bat-
tery and run the regulator down to the position shown.
14-17