Mazda 323 1988 Workshop Manual page 784

11
REAR DISC BRAKE
Piston Seal
Remove the piston seal with the
SST.
Needle Bearing
1. Secure the caliper in a vise
Caution
Insert a soft, protective material (such as cop-
per plates) in the jaws of the vise.
2. Remove the needle bearing from the caliper with
the
SST.
Inspection of Caliper Assembly
Check the following and repair or replace any faulty
parts.
1, Cylinder and piston for wear and rust
2. Caliper body for damage and cracks
3. Mounting support for damage and cracks
4. Sleeve bolt and sleeve for damage and wear
5. Guide pin for damage and rust
6. Adjuster spindle threads for damage
Application of Grease
Before assembly, apply the grease supplied in the
seal kit to the parts indicated by the arrows.
I) : Orange grease
+ : White grease
S#ZS : Red grease
11-42