Clutch Cable; Removal; Inspection - Mazda 323 1988 Workshop Manual

6
CLUTCH CABLE
CLUTCH CABLE
REMOVAL
1. Remove the adjusting nut and pin
2. Remove the clutch cable bracket.
3. Disconnect the cable from the pedal assembly.
4. Remove the cable from the engine compartment
side.
INSPECTION
Check the following, and replace if necessary:
1. Damage to the inner or outer cable
2. Function of the cable
INSTALLATION
Install in the reverse order of removal and note the
following:
1, Apply lithium grease to the pedal cable hook and
the joint between the release lever and pin.
2. install the clutch cable bracket.
Tightening torque
16-23 N.m (1.6-2.3 m-kg, 12-17 ft-lb)
3. Adjust the pedal freeplay (Refer to Page 6-5)