Mazda 323 1988 Workshop Manual page 98

ON-VEHICLE MAINTENANCE (TIMING BELT) 1
B
ON-VEHICLE MAINTENANCE
TIMING BELT
Removal
1. Disconnect the battery negative cable.
2. Remove the parts in the numbered sequence shown in the figure.
1. Side cover
2. Water pump pulley
3. Drive belt
4. Crankshaft pulley
Note
5. Timing belt cover (upper, middle, lower)
6.
Baffle plate
7. Timing belt tensioner and spring
8. Timing belt
Remove the No. 3 engine mount installation nuts and lower the engine to remove the
A/C
and P/S pulley and the crankshaft pulley.
lB-11