Mazda 323 1988 Workshop Manual page 167

ZA
OIL PUMP
DISASSEMBLY AND ASSEMBLY
1, Disassemble the parts in the numbered sequence, shown in the figure.
2. Assemble in the reverse order of disassembly.
1. Bolt
2. Pump cover
3. Outer gear
4. Inner gear
5. Split pin
6. Plunger as-
sembly
7. Oil seal
6. Pump body
,
Oil Pump Cover
Removal
Loosen the screws by an impact driver so that the
oil pump body is not damaged.
installation
1, Coat locking agent on the screw threads.
2. Install the pump cover to the body.
Oil Seal
Removal
Remove the oil seal by using a screwdriver or simi
lar tool to pry it out.
Installation
1, Apply engine oil to the pump body and the new
oil seal.
2. Press the oil seal in until it is flush with the front of
the pump body.
i