4B
FUEL SYSTEM
Pressure regrator
Transfer
Pump
Warning
Before performing
the following
procedures,
release the fuel pressure
to reduce the pos-
slbillty
of Injury or fire.
(Refer to page 48-37)
---'.
1. Remove the filler cap.
2. Remove the transfer pump bracket under the
vehicle.
3. Disconnect the fuel hoses.
4. Disconnect the connector.
5. Install in the reverse order of removal.
Pressure
Regulator
1. Remove the throttle body. (Refer to page 48-29)
2. Disconnect the fuel main hose and return hose.
3. Remove the pressure regulator.
4. Install the pressure regulator, and throttle body in
reverse order of removal.
Injector
1, Remove the throttle body. (Refer to page 48-29)
48-50
323 Revised IO/87