Mazda 323 1988 Workshop Manual page 533

7c
DISASSEMBLY
(PRIMARY SHAFT GEAR)
Bearing Inner Race (4th gear end of primary
shaft gear)
Press the bearing inner race from the shaft with the
SST
and a press.
Caution
Hold the shaft with one hand so that it does
not fall.
4th Gear
Remove the 4th gear and synchronizer ring
Clutch Hub Assembly (3rd-4th gear)
1, Remove the retaining ring,
2. Set the
SST
onto the 3rd gear, and then, using
a press, remove the clutch hub assembly and 3rd
gear.
Caution
Hold the shaft with one hand so that it does
not fall.
7C-26