Mazda 323 1988 Workshop Manual page 838

14
FRONT DOOR, FRONT DOOR GLASS AND REGULATOR
ADJUSTMENT
Door Lock Striker
1. Check whether the door can be closed easily and
whether there is any play. If there is a problem loos-
en the striker installation screws and adjust it by
moving the striker up and down or side to side.
2. Check the rear offset of the door to the body. If
there is a problem adjust it by moving the door lock
striker side to side.
Door Hinges
I. Open the door. If there is play in the hinges, tight-
en the door hinge installation bolts (arrows).
2. To adjust the door-to-body offset, loosen the door
hinge installation bolts and make the adjustment.
FRONT DOOR GLASS AND
REGULATOR
REMOVAL
1, Remove the inner handle cover, the regulator han-
dle, and the door trim (arrows).
Note
For vehicles with power windows, disconnect
the power window connector.
2.
Peel off the door screen.
Caution
Peel the screen off carefully so that it can be
reused.