Mazda 323 1988 Workshop Manual page 699

STEERING WHEEL AND COLUMN 10
STEERING WHEEL AND COLUMN
REMOVAL AND INSTALLATION
1. Jack up the vehicle and support it with safety stands,
2. Disconnect the battery negative cable.
3. Remove in the sequence shown in the figure.
4. Install in the reverse order of removal.
1. Horn cap 6. Harness couplers 11. Under cover
2. Lock nut 7. Combination switch 12. Dust boot
3. Steering wheel 8. Lower panel 13. Intermediate shaft
4. Screw 9. Lower louver 14.
5. Column cover
Steering shaft
IO. Demister duct
15. Steering lock
IO-17