Mazda 323 1988 Workshop Manual page 438

7A
REMOVAL
3
22. Separate the change control rod from the transaxle.
23. Remove the extension bar from the transaxle.
24. Remove the wires from the starter motor, and re-
move the starter motor.
i
I 29
25. Remove the end plate.
26. Lean the engine toward the transaxle side by
loosening the engine support hook bolt.
27. Support the transaxle with a jack
28. Remove the No. 2 engine bracket.
29. Remove the remaining transaxle mounting bolts
30. Remove the transaxle.
7A--14