Mazda 323 1988 Workshop Manual page 424

CLUTCH AND FLYWHEEL 0
5. Clean the clutch disc splines and primary shaft
splines, then apply clutch grease. (Mori White TA
No. 2 or equivalent organic molybdenum grease)
6. Install the clutch disc by using the SST.
Note
Install the clutch so that It faces in the direc-
tion shown in the figure.
7. Tighten the pressure plate gradually, diagonally
and evenly. Use the SST.
Tightening torque
16-26 N.m (1.6-2.6 m-kg, 13.0-20.3
ft-lb)
323 Revised IO/87 6-Z