Mazda 323 1988 Workshop Manual page 39

IA
ON-VEHICLE MAINTENANCE (CYLINDER HEAD)
"-*-hing mark
17. Align the distributor blade with the small oil holes,
then install the distributor by referring to Section 5.
18. Install the spark plugs.
--
Tightening torque:
15-23 Ndrn (1.5-2.3 m-kg, 11-17 ft-lb)
19. Install the high-tension leads.
Y
Y--
83"01A~036
71
20. Install the engine harness connectors.
21, Install the canister hoses.
22. Install the ~vacuum hoses.
23. Install the brake vacuum hose.
24. Install the heater hoses.
25. Install the fuel hose.
26. Install the accelerator cable and cruise control
cable.
27. Install the oil level gauge.
28. Install the air cleaner assembly.
29. Fill the radiator with coolant.
30. Perform the necessary engine adjustments refer-
ring to TUNEUP PROCEDURE section.