Mazda 323 1988 Workshop Manual page 707

STEERING GEAR AND LINKAGE 10
Enaine mwn
3. Hook a chain and engine hoist to the engine and
transaxle, and put slight tension on the chain.
4. Remove the transmission control cable clip.
5. Remove the nuts mounting the transfer unit to en-
gine mount No.4.
6. Lower the engine gradually until bolt @can be
removed.
Caution
Do not lower the engine too much because it
will damage the driveshaft boots.
7. Remove bolts @ and @ and remove engine
mount No.1.
8. Remove the lower left mounting bolt
lo-25