Mazda 323 1988 Workshop Manual page 106

ON-VEHICLE MAINTENANCE (CYLINDER HEAD) 1
B
12. Install the surge tank bracket.
Tightening torque:
Bolt 0: 31-46 N,m
(3.2-4.7 m-kg, 23-34 ft-lb)
Bolt 0: 19-26
N,m
(1.9-2.6 m-kg, 14-19 ft-lb)
13. Connect the engine harness connectors.
14. Connect the vacuum hoses,
15. Connect the Fuel hoses.
16. Install the accelerator cable.
17. Install the exhaust manifold and turbocharger as-
sembly along with new gasket.
Tightening torque:
39-57 N.m (4.0-6.8 m-kg, 29-42 ft-lb)
18. Install the coolant bypass pipe bracket.
Tightening torque:
39-57 N.m (4.0-5.8 m-kg, 29-42 ft-lb)
19. Connect the turbocharger and turbocharger
bracket.
Tightening torque:
22-30
N.m (2.2-3.1 m-kg, 16-22 ft-lb)
18-19