Mazda 323 1988 Workshop Manual page 696

10
INSPECTION AND ADJUSTMENT
2. Attach the caster/camber gauge to the adapter,
and then measure the camber and caster.
2WD
4WD
Csmbef angle Lmo' * 30'
1wo'*30'
caster angle
1'35~ * 45' 1045' * 45'
Left/right difference:
Camber: 30' or less
Caster: 40' or less
Adjustment
Note
The camber is adjustable by 28' to either
negative or positive side, the caster Is not ad-
justable.
1. Jack up the front of the vehicle and support it with
safety stands.
2. Open the hood.
3. Remove the two nuts mounting the shock absorber
mounting block to the fender.
4. Push the mounting block downward, turn it IgO",
mount it on the fender again and tighten it to the
specified torque.
Tightening torque: 23-29 N-m
(2.0-3.0 m-kg, 14-22 Mb)
Note
When the white mark on the mounting block
is rotated from the engine side to the outside,
the camber change is negative.
10-14
323 Revised 10187