Mazda 323 1988 Workshop Manual page 34

ON-VEHICLE MAINTENANCE (CYLINDER HEAD) 1
A
CYLINDER HEAD
Removal
-.-
Warning
Release the fuel pressure (Refer to FUEL PRESSURE RELEASE of FUEL SYSTEM section).
1. Disconnect the battery negative cable.
2. Drain the coolant.
3. Remove the parts in the numbered sequence shown in the figure
1. Air cleaner assembly
9. High-tension leads
16. Exhaust manifold insulator
2. Oil level gauge IO. Distributor
17. Exhaust manifold
3. Accelerator cable and 11. Spark plugs
18. Water pump pulley
cruise control cable 12. Engine hanger and ground
19. Upper timing belt cover
4.
Fuel hoses wire
20. Timing belt
5. Heater hoses 13. Upper radiator hose
21. Cylinder head cover
6. Brake vacuum hose 14. Water bypass hose and
22. Camshaft pulley
7. Canister hose
bracket
23. Cylinder head bolts
8. Engine harness connectors 15. Intake manifold assembly
24. Cylinder head
25. Thermostat assembly
lA-15