Mazda 323 1988 Workshop Manual page 84

ASSEMBLY 1
A
8. Measure the tension between the crankshaft pul-
ley and the camshaft pulley.
If the timing belt tension is not correct, temporarily
secure tensioner lock bolt so the spring is fully ex-
tended and repeat steps 3-7 above or replace
the tensioner spring.
liming belt deflection: 12-13 mm
(0.47-0.51 in)/98 N (10 kg, 22 lb)
Timing Belt Cover
install the lower and upper timing belt covers and new
gaskets.
Tightening torque:
8-11 N.m (0.8-1.1 m-kg, 69-95 in-lb)
Crankshaft Pulley
Install the crankshatt pulley and baffle plate.
Tightening torque: 12-17 N.m
(1.25-1.75 m-kg, 109-152 in-lb)
Water Pump Pulley
Install the water pump pulley.
Tlghtening torque:
8-11 N,m (0.8-1.1 m-kg, 69-95 In-lb)
Engine Bracket
Install the engine bracket.
Tightening torque:
93-l 13 N.m (9.5-l 1.5 m-kg, 69-83 ft-lb)
1 A-65