Mazda 323 1988 Workshop Manual page 436

?A
REMOVAL
able from the
5. Disconnect the clutch cable from the release le-
ver, and remove the clutch cable bracket mount-
ing bolts.
6. Remove the ground wire installation bolt.
7. Remove water pipe bracket.
8. Remove the secondary air pipe and E.G.R. pipe
bracket.
9. Remove the wire harness clip.
0. Disconnect the coupler for the neutral switch and
the back-up light switch.
1, Disconnect the body ground connector.
2. Remove the two upper transaxfe to engine mount-
ing bolts.
7A--12