Mazda 323 1988 Workshop Manual page 700

Steering Wheel
1. Remove the horn cap by removing the screws, and
remove the locknut.
2. The steering wheel must be removed using a suita-
ble puller.
Steering Lock
1. Use a chisel to make a groove in the head of the
steering-lock installation screw. Remove the screw
by using a flat-tipped screwdriver, and then remove
the steering lock.
2. After installing the steering lock to the jacket, use
new steering lock mounting screws, and screw
them in until the neck of the screw breaks off.
Caution
Tighten the steering lock mounting screws
while checking the lock operation.
lo-18