Mazda 323 1988 Workshop Manual page 865

SLIDING SUNROOF
14
9. Remove the guide bracket assembly from the rail,
and then pull the driving cable out.
INSTALLATION
1. Insert the driving cable into the tube assembly.
Note
Apply an ample amount of grease to the clriv-
ing cable and insert the cable through the end
of the assembly. Apply an ample amount of
grease on the sliding surfaces of the cam and
guide shoe.
2. Properly adjust the left and right positions of the
driving cable.
Note
Insert the guide rail into its bracket and insert
the rear end of the bracket into the notch at
the rear of the rail.
3. Install the lower panel to the guide bracket assem-
bly screw(s).
14-43