Display Irf Configuration - H3C S5500-EI Series Irf Command Reference

Field
CPU-MAC
Auto upgrade
Mac persistent

display irf configuration

Syntax
display irf configuration
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display irf configuration command to display the pre-configurations of members of the
current IRF virtual device.
The pre-configurations take effect at the reboot of the device. The command displays the member ID,
priority, IRF port state, and port information.
Examples
# Display the pre-configurations of all members of the current IRF virtual device.
<Sysname> display irf configuration
MemberID NewID
1
2
*3
+4
--------------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
Slave
Master
SlaveWait: Joining the IRF virtual device.
Loading: Loading the system boot file.
Bridge MAC address of the CPU of the device
Whether the auto upgrade of configuration files is enabled:
yes: Enabled
no: Disabled
Whether the bridge MAC address preservation is enabled:
6 min: When the master leaves, the bridge MAC address does not change within
six minutes.
always: No matter whether the master leaves the IRF virtual device or not, the
bridge MAC address remains unchanged.
no: As soon as the master leaves, the IRF virtual device uses the bridge MAC
address of the newly elected master as its bridge MAC address.
IRF-Port1
5 1,2
2 1,2
3 1
4 1
Description
IRF-Port2
3,4
3
3
disable
1-2