Reset Lacp Statistics; Shutdown - H3C S6812 Series Command Reference Manual

interface-number: Specifies an existing aggregate interface number.
Usage guidelines
Use this command to clear history statistics before you collect traffic statistics for a time period.
If you do not specify an aggregate interface type, the command clears statistics for all interfaces in
the system.
If you specify only an aggregate interface type, the command clears statistics for all aggregate
interfaces of the specified type.
The bridge-aggregation keyword is available only when Layer 2 aggregate interfaces exist on the
device.
Examples
# Clear statistics for Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1

reset lacp statistics

Use reset lacp statistics to clear LACP statistics for the specified link aggregation member ports.
Syntax
reset lacp statistics [ interface interface-list ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number1 [ to interface-type interface-number2 ]. The value for the interface-type
interface-number1 argument must be equal to or greater than the value for the interface-type
interface-number2 argument. If you do not specify any member ports, the command clears LACP
statistics for all member ports.
Examples
# Clear LACP statistics for all link aggregation member ports.
<Sysname> reset lacp statistics
Related commands
display link-aggregation member-port

shutdown

Use shutdown to shut down an aggregate interface or subinterface.
Use undo shutdown to bring up an aggregate interface or subinterface.
Syntax
shutdown
undo shutdown
Views
Layer 2 aggregate interface view
25