Display Link-Aggregation Verbose - H3C S5120-EI Series Command Reference Manual

Field
Aggregation Mode
Loadsharing Type
Actor System ID
AGG Interface
AGG Mode
Partner ID
Select Ports
Unselect Ports
Share Type

display link-aggregation verbose

Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups corresponding
to Layer 2 aggregate interfaces.
interface-number: Specifies an aggregate interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display link-aggregation verbose command to display detailed information about the
aggregation groups corresponding to the aggregate interfaces.
Description
Aggregation group type:
•
S for static link aggregation.
•
D for dynamic aggregation.
Load sharing type:
•
Shar for load sharing.
•
NonS for non-load sharing.
Local system ID, which comprises the system LACP priority and the
system MAC address.
Type and number of the aggregate interface.
Aggregation group type.
System ID of the partner, which comprises the system LACP priority
and the system MAC address.
Total number of selected ports.
Total number of unselected ports.
Load sharing type.
77