Display Ip Routing-Table Verbose - H3C S3100-52P Command Manual

Command Manual – Routing Protocol
H3C S3100-52P Ethernet Switches
O_NSSA
Total
Table 1-3 Description on the fields of the display ip routing-table statistics
command
Proto
route
active
added
deleted
Total
1.1.7

display ip routing-table verbose

Syntax
display ip routing-table verbose
View
Any view
Parameter
None
Description
Use the display ip routing-table verbose command to display the verbose routing
table information.
With the verbose argument provided, this command displays the verbose routing table
information. The descriptor describing the route state will be displayed first. Then, the
statistics of the entire routing table will be output. Finally, the verbose description of
each route will be output.
The display ip routing-table verbose command can display all current routes,
including inactive routes and invalid routes.
0 0
28 5
Field
Chapter 1 IP Routing Table Display Commands
0 0
29 1
Routing protocol. O_ASE stands for
OSPF_ASE routes; O_NSSA stands for
OSPF NSSA routes; AGGRE stands for
aggregated routes.
Total number of routes
Number of active routes
Number of routes added after the router
is rebooted or the routing table is cleared
last time.
Number of routes deleted (Such routes
will be freed in a period of time)
Total number of the different kinds of
routes
1-8
Description