Hunt Group Permissions - Talkswitch CT.TS005.003904 User Manual

Hunt group permissions

The Hunt Group Permissions area allows you to select the hunt groups that the extension can
use. You can restrict an extension's access to specific hunt groups. Each extension has access to
all hunt groups by default.
1. Click Additional Settings. The Additional Settings window appears.
2. Select the Hunt Group Permissions tab.
3. Set the check boxes in the Hunt Group Permissions area to control access to the hunt groups.
Select a check box to grant access to the hunt group, or clear the check box to remove
access.
4. If 3-Way Calling/Conference is selected in the Telephone Lines page, you can select the
Allow the use of same line connect (by dialing 80) check box. If this is selected, the user can
transfer a call to a remote extension using the same telephone line that the caller is on. The
user dials Flash, remote extension, and then Flash 4. The telephone company puts the
caller on hold, and the TalkSwitch system uses the same telephone line to try the remote
extension.
T A L K S W I T C H C O N F I G U R A T I O N 65