Table of Contents
Advertisement
Configuring the TS-850i for use within the office
If the TS-850i is located within the office, it connects to your TalkSwitch system over the local
area network (LAN).
Before configuring a phone, ensure that no handsets registered with the associated base are
being used. If a handset is on a call, the call will be terminated when the system resets the base
during configuration of the phone.
1. Launch the TalkSwitch management software.
2. Select the Local Extensions/Fax page.
3. Select an available extension number.
Activate extension area
1. Ensure the Activate extension check box is selected.
2. Set the Extension type to IP extension.
3. Enter the user's First name and Last name. The names are used for caller ID, and appear
within other pages of the TalkSwitch management software. The Last name is used with the
dial-by-name directory.
4. Select TalkSwitch as the Type of phone, and then select TalkSwitch 850i as the model.
5. Select the language for prompts heard by the user of the extension in the System prompt
language list.
6. Click the Additional Settings button to set up:
•
Direct line access (see Direct line access on page 62)
•
Hunt group permissions (see Hunt group permissions on page 65)
•
Caller ID settings (see Caller ID settings on page 66)
IP extension details area
1. Set the Location to Internal.
2. Select the Phone MAC address of the base associated with the handset. The MAC address is a
12-digit alphanumeric string located on the box and under the base.
T A L K S W I T C H C O N F I G U R A T I O N
94
Advertisement
Table of Contents
Troubleshooting
