Talkswitch CT.TS005.003904 User Manual page 42

3. Double-click the TalkSwitch icon on your desktop to open the TalkSwitch management
software. You can also click Start > Programs > TalkSwitch 6.11 > TalkSwitch
Configuration 6.11. The Configuration Selection page appears, and the software attempts
to detect your TalkSwitch unit.
4. Select your language. You can select English, Français or Español.
5. Once the software detects your TalkSwitch unit, click Configure Auto-Detected TalkSwitch
System. The software loads the configuration from the TalkSwitch unit, and the About
page appears.
6. If the software was unable to detect your TalkSwitch unit, check that all your wires and
plugs are securely connected, and then click Retry Auto-Discovery. The software loads the
configuration from the TalkSwitch unit, and the About page appears.
7. If auto-detection does not work:
a) Click Connect to Different System. The Connect Via IP window appears.
b) Enter the URL / IP address and Port of the TalkSwitch unit, and then click OK. This is the
public IP address or FQDN of the TalkSwitch system. The software loads the configuration
from the TalkSwitch unit, and the About page appears.
T A L K S W I T C H C O N F I G U R A T I O N 23