Save; Save To > File; Save To > Location - Talkswitch CT.TS005.003904 User Manual

Save

The Save command saves the configuration to the open configuration file or to the connected
TalkSwitch unit. The TalkSwitch unit can be local or at a remote location.
NOTE: New settings must be saved to the TalkSwitch unit to take effect.
Save To > File
The Save To > File command saves the configuration to a new configuration file, or overwrites
an existing configuration file. It does not save the parameter settings to the TalkSwitch unit.
1. Choose File > Save To > File. The File window appears.
2. Enter the name of the configuration file, and then click Save.
Save To > Location
The Save To > Location command saves the configuration from the open configuration file to
the selected TalkSwitch system. The TalkSwitch system can be local or at a remote location. The
command is only available if you opened a configuration file.
1. Choose File > Save To > Location. The Location window appears. If the TalkSwitch
management software auto-discovered your local TalkSwitch system, the window shows the
TalkSwitch unit configured as proxy. If the TalkSwitch unit is connected by Ethernet, the
window shows its IP address. If the TalkSwitch unit is connected by USB, the window shows
its MAC address.
T A L K S W I T C H C O N F I G U R A T I O N 167