Hotline Access - Talkswitch CT.TS005.003904 User Manual

2. Select the Direct Line Access tab.
3. Select the Use direct line access on check box. The window enables the list of line
hunt groups.
4. Select the hunt group.
Note: When using direct line access, you hear the telephone company dial tone when you pick
up the handset. You do not hear the internal dial tone. The following features are only
available from the internal dial tone:
• Intercom calls
• System speed dial numbers
• Calling the receptionist
• Attaching an account code
• Intercom paging
• Group paging
• Overhead paging
To obtain an internal dial tone on an analog extension that is set for direct line access, pick
up the handset, and then press Flash. On an IP extension, press **, and then dial the number
or function.

Hotline access

The Hotline Access area allows you to select the resource that the extension will connect to. This
restricts the extension to one special task, and you cannot use the extension for any
other purpose.
An analog extension will automatically connect to the resource when you lift the handset. A TS-
9133i will connect to the resource when you press the top programmable function key. A TS-480i
will connect to the resource when you press the HotLine softkey. Other IP phones do not
support hotline access.
1. Click Additional Settings. The Additional Settings window appears.
T A L K S W I T C H C O N F I G U R A T I O N
• Hunt groups
• Stutter dial tone for new voicemail
• Voicemail retrieval/access
• Entering command mode
• Call pickup
• Retrieving a parked call
• Do Not Disturb functions
63