PARKING CALLS AND PAGING
If you have direct line access, dial
‡ symbol.
Parking a call
Parking a call is similar to placing a call on hold, but a user can retrieve a parked
call from any local extension.
1. During a call, press the Hold softkey.
2. Dial
510, and then press the Green Phone key. The system responds
with a parking orbit (500–509).
3. Page the user for whom the call is parked, and provide the parking orbit.
Retrieving a parked call
1. Dial
Phone key.
Two-way intercom paging
Two-way intercom paging connects your phone to the other extension's speaker,
and allows the other user to respond. The other phone must be a TalkSwitch
phone (TS-200, TS-400, TS-600, TS-9112i, TS-9133i or TS-480i). Note that a
TS-850i cannot receive a two-way intercom page.
1. In Idle mode, dial
One-way group paging
One-way group paging connects your phone to the speakers of the extensions
within a ring group, without allowing the other users to respond. It can also
connect your phone to one other extension. The other phones must be TalkSwitch
analog phones (TS-200, TS-400 or TS-600). Note that a TS-850i cannot receive a
one-way group page.
1. In Idle mode, dial
Green Phone key.
E V E R Y C A L L C O U N T S
‡
+ parking orbit (500–509), and then press the Green
‡
84 + extension, and then press the Green Phone key.
‡
85 + ring group (or extension), and then press the
first, where indicated by the
3 1