Setting Up Line Hunt Groups - Talkswitch CT.TS005.003904 User Manual

1. Select the VoIP Numbers page.
2. Select a VoIP number slot.
3. Select the Activate VoIP Number check box.
4. Set the VoIP profile to TalkSwitch.
5. Enter the VoIP number into the Phone number box.
6. Set up call handling for the VoIP number. For more information, click the Help icon (
the Call Handling area.
7. Repeat steps 2 to 6 for each additional VoIP number.

SETTING UP LINE HUNT GROUPS

IMPORTANT: Ensure that hunt group 9 or 0 is assigned to the group of telephone lines or VoIP
trunks used for calls to emergency services.
If a VoIP-enabled TalkSwitch unit is present, hunt group 88 uses the TalkSwitch VoIP network by
default, and the other hunt groups use telephone lines. You can modify these default settings as
described on page 235.
Note that the user does not have to dial the hunt group number before VoIP numbers 250–299:
these automatically use the TalkSwitch VoIP network.
If 50 VoIP numbers aren't enough for the network, you can set up longer VoIP numbers. To reach
a longer VoIP number, the user will first dial a hunt group number.
A local extension can be restricted to a set of hunt groups in order to control access to VoIP
networks. See Hunt group permissions on page 65.
V O I P I N F O R M A T I O N
) in
229