Open > Talkswitch Location; Open > Configuration File - Talkswitch CT.TS005.003904 User Manual

Open > TalkSwitch Location
The Open > TalkSwitch Location command connects to the selected TalkSwitch unit and
retrieves the configuration. The TalkSwitch unit can be local or at a remote location. You can
then modify the file using the TalkSwitch management software. The command is only available
when no configuration is open.
1. Choose File > Open > TalkSwitch Location. The Connect Via IP window appears.
Alternatively, you can also click the Connect to a Different System button or the Connect
to a System Via IP button in the Configuration Selection page.
2. Enter the URL / IP Address of the TalkSwitch unit, and then click OK. You can also choose
the TalkSwitch system from the address book.
Open > Configuration File
The Open > Configuration File command opens a saved configuration file. You can then use the
TalkSwitch management software to modify the configuration. The command is only available
when no configuration is open.
1. Choose File > Open > Configuration File. The Configuration File window appears.
Alternatively, you can also click the Open a Configuration File or Template button in the
Configuration Selection page, and then click the Open a File button.
2. Choose the configuration file, and then click Open.
T A L K S W I T C H C O N F I G U R A T I O N 166