Appendix D: Safety And Regulatory Information - Talkswitch CT.TS005.003904 User Manual

A P P E N D I X D
A pp e n di x D : Sa fe t y a n d Re g u lato r y I n fo r m ati o n
SA FE TY A N D
RE G U LA TOR Y I N FO R MA TIO N
The following information applies to TalkSwitch units bearing the part number CT.TS001.1.
Safety Precautions
Before using TalkSwitch, please review and ensure the following safety instructions are
adhered to:
1. Read, follow and retain instructions — All safety and operating instructions should be read,
followed and retained for future reference before operating the equipment.
2. Heed warnings — All warnings on the equipment and in the operating instructions should
be adhered to.
3. Temperature — Do not operate in environments where the temperature is below 0°C or 32°F.
If the product was shipped in cold weather, please let the system warm up at room
temperature for at least two hours before plugging it in to a power outlet.
4. Moisture — Do not place TalkSwitch in a high-humidity environment.
5. Heat — Never place TalkSwitch near heat sources such as radiators, floor registers or in
direct sunlight. Do not stack units on top of each other.
6. Power supply — The equipment should only be connected to an approved power supply of
the type described in the operating instructions or marked on the equipment. Use only the
power adapter supplied with TalkSwitch.
7. Damage requiring service — Do not attempt to service the TalkSwitch yourself. Unplug
TalkSwitch and refer servicing to a licensed technician when:
• The plug or power cord has been damaged.
• TalkSwitch has been exposed to moisture.
8. Emergency services — If you call an emergency service using an external IP extension, the
TalkSwitch system will not send the address of your location. You must provide your address
to the emergency operator.
S A F E T Y A N D R E G U L A T O R Y I N F O R M A T I O N 256