Ip Configuration; System Ip Settings - Talkswitch CT.TS005.003904 User Manual

IP CONFIGURATION

The IP Configuration page allows you to set up the TalkSwitch system for Internet
communications. The Internet can be used for external IP extensions, a TalkSwitch VoIP
network, a subscription to a VoIP service, and remote configuration.
1. Select the IP Configuration page.

System IP settings

The System IP Settings area shows IP addresses. By default, Obtain IP and DNS information
automatically is selected and the area shows IP addresses from the router.
1. Change Obtain IP and DNS information automatically to Use configured IP and DNS
information in order to lock in the IP addresses.
2. In some cases, the System IP Settings area may be blank because your router has not
delivered the IP addresses. If so, enter the following IP addresses from your
LAN administrator:
a) Enter a static IP address for each TalkSwitch unit in the Unit IP address boxes.
b) Enter the Subnet mask for the LAN. This address determines the subnet the unit IP
addresses belong to.
c) Enter the IP address of the Default gateway on your network. A gateway is a hardware
device that connects the office network to the Internet. The router may act as
default gateway.
d) Enter the IP address of the Preferred DNS server. DNS is a service used to resolve a domain
name to an IP address. The router may act as DNS server.
e) If applicable, enter the IP address of the Alternate DNS server.
T A L K S W I T C H C O N F I G U R A T I O N 34