Table of Contents
Advertisement
Do not disturb cascade
The do not disturb call cascade is used when the extension is in Do Not Disturb mode.
1. Select the Mode 1 tab or the Mode 2 tab.
2. Select the Do Not Disturb tab.
3. Set up the first alternative.
a) Set the If do not disturb is on for this extension list. Choices are:
•
go to voicemail
•
go to local extension
•
go to remote extension
•
go to ring group
•
play announcement
•
go to auto attendant
•
hang up
•
go to VoIP location
b) Select the resource. Depending on the action, resources are voice mailboxes, extensions,
announcements, auto attendants, or VoIP numbers within the TalkSwitch VoIP network.
4. If you selected an extension in the first alternative, set up the second alternative.
a) Set the If busy or not answered after list to the number of rings to try the first
alternative. Choices range from 1 to 9.
b) Set the action. Choices are:
•
go to voicemail
•
go to local extension
•
go to remote extension
•
go to ring group
•
play announcement
•
go to auto attendant
•
hang up
•
go to VoIP location
T A L K S W I T C H C O N F I G U R A T I O N
73
Advertisement
Table of Contents
Troubleshooting
