Charging The Batteries; Registering Handsets With The Base; Using The Handset Charger - Talkswitch CT.TS005.003904 User Manual

Charging the batteries

1. Place the handset in the handset charger. The
handset turns on, and the battery charge indicator
in the display starts to flash.
2. Charge the batteries for at least 10 hours before
first use.

Registering handsets with the base

You must register the handsets with the base. You can use the handset charger, or you can use
the handset itself.
A base can support up to three handsets with three concurrent calls. It can support up to
eight handsets if they aren't all used at once. If you have more than three handsets and are
getting busy signals, add more bases to your installation in order to handle more calls.
NOTE: If the handset you want to register is already registered with another base, you need to
deregister the handset from that base before you can register it with a new base. See
Deregistering a handset from a base on page 93.

Using the handset charger

1. Press the Reset button on the back of the base. A five-minute registration period starts,
which allows handsets to register with the base.
enables handset registration
NOTE: If you have multiple bases, only reset one base at a time, and wait five minutes before
resetting the next base.
2. If the handset is turned off, press the Red Phone key to turn it on.
3. Place the handset in the handset charger. The handset automatically registers with the base,
and the Configure SIP Domain message appears on the display. This message indicates that
you must configure the TS-850i as an IP extension, as described later.
T A L K S W I T C H C O N F I G U R A T I O N
Reset button
92