Emergency Service Numbers; Auto Route Selection - Talkswitch CT.TS005.003904 User Manual

1. If the route requires one carrier code for the whole day:
a) Enter the carrier code in Carrier code 1.
b) Clear the Carrier code 2 check box.
2. If the route requires two carrier codes, one for each part of the day:
a) Enter the first carrier code in Carrier code 1.
b) Enter Start time 1.
c) Select the Carrier code 2 check box.
d) Enter the second carrier code in Carrier code 2.
e) Enter Start time 2.

Emergency service numbers

The Emergency Service Numbers area lists the emergency service numbers that cannot be blocked
by toll restriction.

Auto route selection

The Auto Route Selection area allows you to set the inter-digit timeout (IDT), and to select the
hunt groups that are subject to ARS.
1. Select the Inter-digit timeout (IDT). The default value is 5 seconds. Choices range from 3
seconds to 18 seconds.
ARS and toll restriction are implemented on each call once the longest matching entry is
found in the ARS table or after the IDT expires. If the user has dialed a number and it's a
possible match for an entry in the ARS table, the system will pause until the IDT expires. To
complete a dialed number before the IDT expires, the user can press #.
For example, the ARS table has 12345. The user dials hunt group 88 to use the TalkSwitch
VoIP network, and dials VoIP number 1234. This is a possible match for entry 12345, so
system will pause until the IDT expires. The user can press # to complete the call.
2. Select the hunt groups that are subject to ARS and toll restriction.
a) Click ARS Hunt Groups. The ARS Hunt Groups window appears.
b) Select the Hunt group check boxes. The selected hunt groups will be subject to ARS and
toll restriction.
T A L K S W I T C H C O N F I G U R A T I O N 155