2. Select the Intercom calls follow cascade settings check box to have an intercom call use the
call cascade of the dialed extension. Otherwise the intercom call will ring continuously.
Call Back
The Call Back command allows you to set the number of rings the TalkSwitch unit will allow
before hanging up, during an auto call back or prompted call back.
1. Choose Options > Call Back. The Call Back Options window appears.
2. Select the number of rings the TalkSwitch unit will allow during a call back before hanging
up. Choices range from 1 ring to 9 rings.
Set Date & Time
The Set Date & Time command allows you to set the time, date, time zone, and NTP server. See
System time on page 31.
TROUBLESHOOTING MENU
The Troubleshooting menu has commands for setting system timing.
Do not change the following controls unless directed. If your system does not appear to be
functioning properly, please contact your dealer for assistance.
Auto Attendants
The Auto Attendants command allows you to set auto attendant timers.
1. Choose Troubleshooting > Auto Attendants. The Auto Attendants window appears.
T A L K S W I T C H C O N F I G U R A T I O N
181