Polycom Or Grandstream; Counterpath Or Other Ip Phone; Direct Line Access - Talkswitch CT.TS005.003904 User Manual

i) Click Select. The MAC Selection window appears. Detected MAC addresses lists the
MAC addresses of bases connected to the LAN. A base can accommodate up to eight
handsets. If a handset has already been assigned to an extension, Ext Assignment
shows the extension number, first name and last name. If a handset can be assigned
to the extension, Ext Assignment shows Available.
ii) Select Available, and then click Select.
2. Select the Handset ID for the extension. Use the handset name on the handset screen, as
shown on page 93.

Polycom or Grandstream

1. Enter the MAC address. The MAC address is printed on the bottom of the phone or on the
phone's shipping box.

Counterpath or Other IP phone

1. Enter the Username and Password. The default settings are user[extension number] and
pass[extension number]. These are used to manage calls between TalkSwitch and the IP
extension and must match the username and password of the IP phone. Change only
if required.

Direct line access

The Direct Line Access area allows you to select the hunt group that the local extension will use
automatically. When an analog phone goes off-hook or a number is dialed on an IP phone, the
TalkSwitch unit will automatically find an available line within that hunt group.
Example: You have a fax machine connected to the local extension and don't want to reprogram
the speed dial numbers with hunt group numbers. Enable direct line access and select the hunt
group. As soon as the fax goes off-hook, it finds an available line within the line hunt group.
1. Click Additional Settings. The Additional Settings window appears.
T A L K S W I T C H C O N F I G U R A T I O N 62