Table of Contents
Advertisement
Configuring a new SIP account
The following procedure describes setting up the eyeBeam software to register on the network
and to make itself available as a client for sending and receiving calls.
1. Install the eyeBeam software. The SIP Accounts window appears.
2. Click the Add button. The Properties of Account1 window appears.
3. Enter the User Details in the Account tab.
a) Set the Display Name to the name for Caller ID.
b) Set the User name to the local extension number.
c) Set the Password to the Password set up in step 3 of IP extension details area on
page 107.
d) Set the Authorization user name to the Username set up in step 3 of IP extension details
area on page 107.
T A L K S W I T C H C O N F I G U R A T I O N
108
Advertisement
Table of Contents
Troubleshooting
